Portland cement
CEM I – 32.5 N
-
Recommended for columns, slabs and reinforced concrete applications
-
Moderate heat of hydration and less concrete cracks
-
Multi-purpose Suitable for all construction applications
-
Multi-purpose cement , applicable for all construction application
-
High strength Grade 32.5N
Ordinary Portland Cement CEM I – 32.5 NDesigned for use in mass concrete buildings, as the Portland cement ranked 32.5 N is characterized by its low temperature of hydration, which reduces the concrete cracks and increases the building durability, which in its turn makes it suitable for all types of concrete (reinforced and plain). |
 |
USAGE:
- Mass concrete
- Reinforced concrete
- Plain concrete
- Precast concrete
- Finishing
Standard Specifications:
In compliance with the Egyptian Standard Specification No. 4756-1/2013
In compliance with the single European Specification No. 197-1/2011
Technical Specifications:
,Component
| Clincker | ≥ 95% |
| Gypsum | ≤ 5% ( using to control setting time ) |
Chemical Properties
| CL | ≤ 0.1 % (by weight) |
| So3 | ≤ 3.5% (by weight) |
Physical & Mechanical properties
| Initial setting time | ≥ 75 min |
| Expansion | ≤ 10 mm |
| Compression resistance after 7 days | ≥ 16 N/mm2 |
| Compression resistance after 28 days | ≥ 32.5 N/mm2 |
Storage:
- In a dry place isolated from humidity and rain.
- Stack the cement bags off the floor on wooden pallets with an impermeable plastic sheet Cover.
- Maintain a space of 60 cm between exterior walls and the stacks.
- Stack the cement bags close to each other to reduce circulation of air.
- Stack limit : 10 bags.
